[RMS]BMW E36 Stage 2 Supercharger Kit [] 416.7 PS / 462.3 Nm @ 0 PSI

Kits for
Forum rules
IMPORTANT: vendors should use the special add/edit kit page to maintain their topics and original post. Users are welcome to ask questions or review their own experiences. Stay objective with critism, if you have issues with your kit, contact the manufacturer directly.
Post Reply
Site Admin
Posts: 1176
Joined: 01 Oct 2012, 15:47

[RMS]BMW E36 Stage 2 Supercharger Kit [] 416.7 PS / 462.3 Nm @ 0 PSI

Post by Jeroen » 26 Aug 2013, 15:23

BMW E36 Stage 2 Supercharger Kit created by RMS race marque systems [RMS]

Typical results for a "": 416.7 PS / 462.3 Nm @ 0 PSI
For pricing or details on this kit check http://racemarque.com/index.php?page=sh ... &Itemid=64
More information on the vendor: http://racemarque.com

The many facets of the E36 M3 S50 USA system are the result of years of research and development. That's what it takes to produce the fastest and most reliable BMW Supercharged Automobiles.

RMS Hardware - RMS Hardware is known to be the best in the industry. Nothing is spared in RMS hardware design. The surface ground, 26mm, 6061 t6 Aluminum plate, ridged mounts the supercharger to the engine with attention to details fit, and finish. The No Flex design assures perfect belt alignment under extreme conditions. These heavy duty brackets are used on all E36 M3 stages using the V1 or V2 Blower

Supercharger - RMS uses the Vortech V2 Sci trim blower on the E46 M3. This model blower is considered the new generation among superchargers. Highly advanced computer designed gears feature an optimized helical profile which allows for near silent operation while providing superior performance. Ideal for latest generation of improved breathing, high-power street and strip engines. Vastly improved flow and efficiency at high boost levels, providing completely new levels of power gain.

Blower Drive - We spend a great deal time and effort making the best blower drive components for our kits.The Crank Pulley is a two piece modular design. It consists of two parts. One part is the RMS Crank Hub and the second part is the RMS Blower Drive Pulley. The Hub bolts onto the engine and the Supercharger Drive Pulley bolts onto the hub. This makes it possible to replace the Drive Pulley with out having to purchase an entire Crank Pulley setup. The Hub always remains in place. ( see optional pulley setups in the Blower Drive category)

Airflow Management - Much thought goes into our airflow components. All components are designed keeping two driving factors in mind, temperature and velocity. The Thermoplastic air intake system integrates By-Pass control and PCV systems. This RMS By-Pass Valve diverts large amounts of air when not needed, and maximizes gas mileage and smooth drivability by efficiently controlling air flow anomalies. When the accelerator is applied, high rpm power responds instantly.

Charge Air Cooling - The RMS Air to Liquid Aftercooler is an RMS original innovation. It has been the talk of the industry. We invented it for BMW forced induction systems back in 1995. This system is designed solely for the S50 supercharged engine. For superior intake air temperature control, RMS Air to Liquid cooling is a must. Unlike Air-to-Air systems, RMS Manifold cools the charge air even when vehicle is at the stop light. Cold air is ready to build responsive torque and horsepower as soon as you put the pedal to the metal. The front mount RMS Heat Exchanger shows through the lower grill and is located for maximum cooling. Included in the cooling system is a high flow electric pump, harness and plumbing. The competition laughed at this approach to charge air cooling but today most of them are trying to learn this art of charge-air cooling.

Software - Engine management is done on the factory chip. We recalibrate the software for efiiciency, power and reliabilty. All software is done inhouse in our dyno laborotory. We do not depend on outside sources for this difficult engineering practice. In-house means, best quality control and most efficient process to deliver the software. Comes with plug and play chip. We have calibrations for most modified cars, low compression gaskets, mafifolds, headers, etc. Also available is the Miller WAR chip along with inhouse tech support. With this you can make your own fine tuning adjustments.

If you want the best supercharger system for your E36 M3, RMS is the only choice. You made the choice to purchase a world-class automobile, the real thing! Why settle for an imitation. Call RMS today to Supercharge your E36 M3.

Race Marque Systems. Innovation in BMW forced induction technology.


Post Reply

Return to “”