CustomTurboWorld.com

Customized turbo and supercharger systems for all engines

View unanswered posts | View active topics It is currently 22 Oct 2018, 21:39

Forum rules


IMPORTANT: vendors should use the special add/edit kit page to maintain their topics and original post. Users are welcome to ask questions or review their own experiences. Stay objective with critism, if you have issues with your kit, contact the manufacturer directly.



Reply to topic  [ 1 post ] 
 [VMAXSCART]MPI 100 SC Kit [Mini Cooper] 101.4 PS / 0 Nm @ 0 PSI 
Author Message
Site Admin

Joined: 01 Oct 2012, 15:47
Posts: 1173
MPI 100 SC Kit created by V-Max scart [VMAXSCART]

Typical results for a "Mini Cooper": 101.4 PS / 0 Nm @ 0 PSI
For pricing or details on this kit check http://www.vmaxscart.co.uk/supercharger-kits/#
More information on the vendor: http://www.vmaxscart.co.uk
Image

THESE KITS ARE ENGINEERED TO SUIT YOUR ENGINE , NOT OFF THE SHELF KITS ! , WE NEED TO GET YOUR ENGINE DOWN TO 8.5:1 COMPRESSION , FOR THIS WE HAVE TRIED AND TESTED DECOMPRESSION PLATES ( A STEEL SHIMM AVAILABLE IN DIFFERENT THICKNESSES , USED WITH TWO TURBO TYPE HEAD GASKETS ) OR LARGER BOWL PISTONS AND/OR LARGER CHAMBER CYLINDER HEADS , beware of steel shim thicker gaskets that may not lower your compression ratio enough !

The use of a supercharger will add torque and power to your engine , you should consider lowering the final drive to make the most of these gains , recommended final drive ratios are 3.1, 2.9 and 2.7:1 for hills, b roads and motorways respectively . Avoid close ratio gear kits such as many straight cut sets are, standard helical gearkits have no trouble coping with the supercharged engines power and offer a wider spread of ratios for all conditions.

Water cooled mainfolds : This kit can be added to an existing conversion , injection or carb and as a by product of cooling the charger, power is gained - usually we see around 10 bhp increase on the dyno with this kit - recommended for hotter climates and used in the MPI150 kit and conversion. £275

NEW: MPI 100 BHP KIT
SUITABLE FOR STANDARD ENGINES (63 BHP) RAISES POWER TO AROUND 100 BHP
kit includes , water cooled manifolding , heat shielding ,Eaton m45 supercharger , pulleys , injectors , fuel regulator , radiator, timing cover , etc ,


Last edited by Jeroen on 26 Aug 2013, 14:45, edited 5 times in total.

Auto create from kit 37



13 Feb 2013, 20:00
Profile WWW
Display posts from previous:  Sort by  
Reply to topic   [ 1 post ] 

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.