[VMAXSCART]MPI 100 SC Kit [Mini Cooper] 101.4 PS / 0 Nm @ 0 PSI

Kits for Austin
Forum rules
IMPORTANT: vendors should use the special add/edit kit page to maintain their topics and original post. Users are welcome to ask questions or review their own experiences. Stay objective with critism, if you have issues with your kit, contact the manufacturer directly.
Post Reply
Jeroen
Site Admin
Posts: 1173
Joined: 01 Oct 2012, 15:47
Contact:

[VMAXSCART]MPI 100 SC Kit [Mini Cooper] 101.4 PS / 0 Nm @ 0 PSI

Post by Jeroen » 13 Feb 2013, 20:00

MPI 100 SC Kit created by V-Max scart [VMAXSCART]

Typical results for a "Mini Cooper": 101.4 PS / 0 Nm @ 0 PSI
For pricing or details on this kit check http://www.vmaxscart.co.uk/supercharger-kits/#
More information on the vendor: http://www.vmaxscart.co.uk
Image

THESE KITS ARE ENGINEERED TO SUIT YOUR ENGINE , NOT OFF THE SHELF KITS ! , WE NEED TO GET YOUR ENGINE DOWN TO 8.5:1 COMPRESSION , FOR THIS WE HAVE TRIED AND TESTED DECOMPRESSION PLATES ( A STEEL SHIMM AVAILABLE IN DIFFERENT THICKNESSES , USED WITH TWO TURBO TYPE HEAD GASKETS ) OR LARGER BOWL PISTONS AND/OR LARGER CHAMBER CYLINDER HEADS , beware of steel shim thicker gaskets that may not lower your compression ratio enough !

The use of a supercharger will add torque and power to your engine , you should consider lowering the final drive to make the most of these gains , recommended final drive ratios are 3.1, 2.9 and 2.7:1 for hills, b roads and motorways respectively . Avoid close ratio gear kits such as many straight cut sets are, standard helical gearkits have no trouble coping with the supercharged engines power and offer a wider spread of ratios for all conditions.

Water cooled mainfolds : This kit can be added to an existing conversion , injection or carb and as a by product of cooling the charger, power is gained - usually we see around 10 bhp increase on the dyno with this kit - recommended for hotter climates and used in the MPI150 kit and conversion. £275

NEW: MPI 100 BHP KIT
SUITABLE FOR STANDARD ENGINES (63 BHP) RAISES POWER TO AROUND 100 BHP
kit includes , water cooled manifolding , heat shielding ,Eaton m45 supercharger , pulleys , injectors , fuel regulator , radiator, timing cover , etc ,
Last edited by Jeroen on 26 Aug 2013, 14:45, edited 5 times in total.
Reason: Auto create from kit 37


Post Reply

Return to “Austin”