[RAPTOR]Raptor Holden Holden Colorado V6 Alloytec Kit [Isuzu D-MAX with LY7] 237.9 PS / 0 Nm @ 9 PSI

Kits for GM
Forum rules
IMPORTANT: vendors should use the special add/edit kit page to maintain their topics and original post. Users are welcome to ask questions or review their own experiences. Stay objective with critism, if you have issues with your kit, contact the manufacturer directly.
Post Reply
Site Admin
Posts: 1176
Joined: 01 Oct 2012, 15:47

[RAPTOR]Raptor Holden Holden Colorado V6 Alloytec Kit [Isuzu D-MAX with LY7] 237.9 PS / 0 Nm @ 9 PSI

Post by Jeroen » 26 Aug 2013, 15:23

Raptor Holden Holden Colorado V6 Alloytec Kit created by Raptor superchargers [RAPTOR]

Typical results for a "Isuzu D-MAX": 237.9 PS / 0 Nm @ 9 PSI
For pricing or details on this kit check http://www.raptorsc.com.au/kits.php?id=64
More information on the vendor: http://www.raptorsc.com.au/makes.php

The first kit manufactured expressly for the Colorado with Alloytec V6 engine. The kit is intercooled and can be putting out power around the 250 - 280kw mark.

The only and finest possible Supercharger solution for Holden Colorado in Australia. Both with water cooled supercharger and Intercooler + 2 Years warranty

You want the best SC system for your Alloytec - Raptor Superchargers has it ready for you now!

This supercharger system is now available



2 year Warranty
Lowest temperature supercharging system
The first Colorado Supercharger system 2WD and 4WD
Very easy to DIY install
Parts included

Raptor V LLC Watercooled supercharger
350 Hp water to air intercooler
32mm Plumb back CBV
6 x 450cc injectors
Pod type air filter Dual stage for maximum dust filtering
Brackets - easy fit
Belt and idlers
Large area water to air radiator
External ECU tuning system
High flow pump and reservior for Intercooler system

Post Reply

Return to “GM”