[BULLET]Jeep Grand Cherokee SRT8 6.1 Hemi [Jeep Grand Cherokee SRT8, 2005] 0 PS / 0 Nm @ 0 PSI

Kits for Chrysler
Forum rules
IMPORTANT: vendors should use the special add/edit kit page to maintain their topics and original post. Users are welcome to ask questions or review their own experiences. Stay objective with critism, if you have issues with your kit, contact the manufacturer directly.
Post Reply
Site Admin
Posts: 1176
Joined: 01 Oct 2012, 15:47

[BULLET]Jeep Grand Cherokee SRT8 6.1 Hemi [Jeep Grand Cherokee SRT8, 2005] 0 PS / 0 Nm @ 0 PSI

Post by Jeroen » 26 Apr 2013, 16:47

Jeep Grand Cherokee SRT8 6.1 Hemi created by Bullet Cars [BULLET]

Typical results for a "Jeep Grand Cherokee SRT8, 2005": 0 PS / 0 Nm @ 0 PSI
For pricing or details on this kit check http://www.bulletcars.com/superchargers ... ystem.html
More information on the vendor: http://www.bulletcars.com/

The Jeep Grand Cherokee version of our Hemi system suitable for SRT8 6.1 V8. Available in both intercooled and non-intercooled setup, this Bullet designed and manufactured supercharger system gives unrivalled performance.

THE Positive Displacement supercharger kit Chrysler Hemi owners have been waiting for.

Covering a wide range of vehicles including the SRT8 Jeep, this Supercharger system delivers exhilarating yet affordable supercharger performance, representing exceptional value and reliability. The increase in useable power is outstanding, while maintaining fuel economy.

With the Supercharger conveniently located in the engine "V", the Bullet kit is visually captivating from the time the hood is lifted. Get ready to be noticed!

Utilising the latest technology and the most innovative rotor design in decades from the world leaders in Supercharger development - Eaton, The Harrop HTV series of Superchargers deliver unparalleled boost response and power.

The HTV1900 is the perfect choice for the Chrysler owner looking for a decent power upgrade whilst retaining everyday driveability.

All kits use the Bullet designed patented cast intake manifold which accepts the optional Bullet Water to Air Intercooler. With a unique Directional flow core, this Intercooler provides maximum cooling with minimal air restriction. The water to air intercooler kit is highly recommended however, it can be retrofitted at a later date.

As with all Bullet Supercharger systems, we stand behind our product 100% and guarantee satisfaction.

Exhilarating performance with maximum boost available throughout the rev range
Simple "Bolt-on" kits designed for factory or modified engines
Removable top plate allowing easy change in Supercharger units without new manifolding
High flow cast manifold designed to fit Bullet directional Intercooler core
Fits under standard bonnet profile - no need for ugly bonnet modifications
Exceptional off boost driveability

Parts Included:
SRT8 Intake Manifold
Supercharger mounting plate
Oil filler and cap
Fuel Rail posts
PCV valve
HTV1900 Supercharger and Dia.70mm Pulley. (Note: HTV2300 Upgrade now available for 6.1 SRT8 and
Stroker Engines.)
Rear entry
Throttle Body inlet pipe
2 Bar Map Sensor
Idler Pulleys and mount kit
Drive Belt
Polished Stainless Steel CAI kit
Hi-flow Injectors
Full colour detailed step by step instructions

Not Included:

• Diablo Predator Flash Tuner
Last edited by Jeroen on 26 Aug 2013, 14:46, edited 2 times in total.
Reason: Auto create from kit 206

Post Reply

Return to “Chrysler”